Whether you’re a beginner or an experienced archer, the Bowtech Assassin’s draw length and weight adjustment capabilities ensure that you can fine-tune your setup to suit your individual needs.
For Bowtech Assassin Draw Length Adjustment, use an Allen wrench to loosen the module screws on the cam system. Rotate the module to the desired draw length setting, making sure both modules are set to the same position. Finally, tighten the module screws securely.
To adjust the draw weight on the Bowtech Assassin, refer to the owner’s manual or consult with a BowTech dealer. Use a hex wrench to tighten or loosen the limb bolts in small increments, making sure to adjust both bolts equally.
Bowtech Assassin Compound Bow
The Bowtech Assassin compound bow is a versatile and user-friendly option for archers.
With an adjustable draw length ranging from 26 to 30 inches and available draw weights of 50, 60, and 70 pounds, it can accommodate a wide range of shooters.
The bow features a Binary Cam System for consistent and accurate arrow flight, a 7-inch brace height, and an IBO speed of 333 fps.
It is often praised for its affordability and comes with the option of being R.A.K. equipped, which includes accessories such as sight, rest, quiver, and stabilizer.
Overall, the Bowtech Assassin offers a reliable performance and value for archers seeking a quality compound bow.
Specifications
Here are some specifications for the Bowtech Assassin compound bow:
- Draw Length: Adjustable from 26 to 30 inches in 1/2 inch increments without the need for a bow press.
- Draw Weight: Available in 50, 60, and 70 pounds
- Brace Height: 7 inches
- IBO Speed: 333 feet per second (fps) at 29 inches and 70 pounds draw weight
- Let-Off: Effective let-off ranges from 65% to 80%
- Kinetic Energy: The search results did not provide specific information on the kinetic energy of the Bowtech Assassin.
It’s important to note that these specifications may vary depending on the model year and any modifications made to the bow.
Features
The Bowtech Assassin compound bow is known for its reliable performance and user-friendly features. While the specific features may vary depending on the model year, here are some common features mentioned in the search results:
- Binary Cam System: The Bowtech Assassin is equipped with a Binary Cam System, which helps to ensure consistent and accurate arrow flight. This cam system stays in tune and works with parallel limbs for improved performance
- R.A.K. Equipped: The Assassin is part of Bowtech’s R.A.K. (Ready. Aim. Kill.) series, which means it comes with a package of accessories included. This can include items such as a sight, rest, quiver, and stabilizer.
- Adjustable Draw Length: The Assassin allows for draw length adjustment without changing the draw weight. The specific instructions for adjusting the draw length can be found in the owner’s manual.
- Affordable Price: The Assassin is often mentioned as a bow that offers good features at a modest price. It provides value for archers looking for a reliable and affordable option.
- String and Cable Features: The Assassin may come with specific string and cable lengths, such as 55 7/16 inches for the string and 36 5/8 inches for the control cable. It may also feature proprietary string serving processes for improved durability.
- Improved Features: Bowtech created the Assassin with several improved features, although the specific improvements are not mentioned in the search results.
The Bowtech Assassin compound bow provides archers with the flexibility and precision they need to achieve optimal performance. With its adjustable draw length and weight, this bow allows for a personalized fit and shooting experience. To assist you in finding the perfect configuration, Bowtech provides a draw length chart that simplifies the process and helps you achieve maximum accuracy and comfort.
Bowtech Assassin Draw Length Adjustment
To adjust the draw length on a Bowtech Assassin compound bow, you’ll need to follow these steps carefully:
Before You Begin:
- Ensure that your bow is unstrung and in a safe position.
- Always consult your Bowtech Assassin’s user manual for specific instructions and safety guidelines.
Adjusting the Draw Length:
- Locate the module on your Bowtech Assassin. These modules are designed to allow draw length adjustments without the need for a bow press.
- Using the appropriate hex wrench (usually a 7/64 hex key), loosen the module bolts that hold the modules to the round disks. These bolts are typically located on the cam or module itself.
- Take note of the module index value on the disk. This value represents the current draw length setting.
- Adjust the module to your desired draw length setting. To increase the draw length, you may need to tilt the module so that the module pointer aligns with a lesser value on the disk. To decrease the draw length, align the pointer with a greater value.
- Once you’ve set the module to your desired draw length, secure the module bolts on each disk. Make sure they are tightened adequately.
- Optionally, consider adding a thread locker like Blue Loctite 242 to the module bolts. This helps prevent the bolts from loosening during use.
- Inspect the limb mechanism to ensure it hasn’t shifted during the adjustment process. Position it as deep as possible on the limb fork for proper alignment.
- On the module side of the disk, you’ll find little gouges called “timing dots.” When looking at the bow, make sure the wire is roughly aligned between these timing dots. This ensures proper timing.
- Double-check that your bowstring and cables are correctly attached and in good condition.
- Before shooting, it’s a good idea to perform a few test shots to ensure everything is functioning correctly at your new draw length setting.
Always remember to follow safety precautions when working with your bow, and if you’re uncertain about any aspect of the draw length adjustment process, consult with a professional archery technician or the manufacturer’s customer support for guidance specific to your Bowtech Assassin model.
Bowtech Assassin Draw Length Chart
Here’s the draw length chart for the Bowtech Assassin compound bow:
Bowtech Assassin Draw Length Chart:
| Module Number | Draw Length Range |
| 1 | 25.5″ – 29″ |
| 2 | 29″ – 30.5″ |
| 3 | 30.5″ – 32″ |
| 4 | 32″ – 33.5″ |
| 5 | 33.5″ – 35″ |
Please note that the Bowtech Assassin allows for draw length adjustments within these ranges by changing the module.
To select the appropriate module, you should consider your own draw length measurement and choose the one that fits within your comfortable range.
If you’re unsure about your draw length, you can measure it by standing with your back to a wall and extending your arms outward. Then, measure the distance between the tips of your fingers and divide by 2.
Once you’ve determined your draw length, use the corresponding module to set up your Bowtech Assassin for the best shooting experience.
Always follow the manufacturer’s instructions and guidelines for making draw length adjustments to ensure safety and accuracy.
Bowtech Assassin Weight Adjustment
To adjust the draw weight on a Bowtech Assassin compound bow, follow these steps carefully:
Before You Begin:
- Ensure your bow is unstrung and in a safe position.
- Consult your Bowtech Assassin’s user manual for specific instructions and safety guidelines.
Adjusting the Draw Weight:
- Locate the limb bolts on your Bowtech Assassin. These bolts are typically found on the limbs near the pockets where the limbs attach to the riser.
- Using the appropriate Allen wrench (hex key) provided with your bow or one of the appropriate size (commonly 3/16 or 7/32 for Bowtech bows), begin by turning the limb bolts counterclockwise to decrease the draw weight.
- To increase the draw weight, turn the limb bolts clockwise. Be sure to adjust both limb bolts equally to maintain balance and prevent limb twist.
- Each full turn of the limb bolts usually results in an approximate 2-3 pounds change in draw weight. Be mindful of your specific bow’s specifications, as this can vary by model.
- After making the desired draw weight adjustment, make sure the limb bolts are securely tightened. However, do not overtighten them; follow the recommended torque specifications in your user manual.
- Recheck the draw weight with a bow scale to ensure it matches your desired setting.
- Always inspect your bowstring and cables for any signs of wear or damage and replace them if necessary.
- Finally, string your bow safely and perform some test shots to ensure that it’s functioning correctly at the new draw weight setting.
It’s important to follow all safety guidelines and consult your user manual for model-specific instructions and torque specifications when adjusting the draw weight on your Bowtech Assassin.
If you’re unsure about any aspect of the process, consider seeking assistance from a professional archery technician or contacting Bowtech’s customer support for guidance specific to your bow model.
