The Mathews DXT has garnered a loyal following, but there have been reports of issues. In this article, we’ll explore those problems and potential solutions. 

Understanding these issues can help you choose the right bow for your needs. Let’s dive into the world of Mathews DXT and the challenges you may encounter.

Mathews DXT

The Mathews DXT is a compound bow model produced by Mathews Inc., a well-known manufacturer of archery equipment. It was first introduced in 2008 and has gained popularity among hunters and archery enthusiasts. 

The DXT is known for its compact size, lightweight, and fast shooting capabilities. It features Mathews’ signature single-cam technology and is designed to provide a smooth draw cycle and high accuracy.

Specs

The Mathews DXT is a compound bow model produced by Mathews Inc. Here are some specifications of the Mathews DXT based on the search results:

  • Axle-to-Axle Length: 29.75 inches
  • Brace Height: 7 inches
  • Draw Length Range: 24-30 inches
  • Draw Weight Range: 40-70 pounds
  • Bow Weight: Approximately 3.75 pounds
  • IBO Speed: Reported to reach speeds of up to 322 fps (for the 2008 Mathews DXT model)

Features

Here are some features of the Mathews DXT compound bow:

  • Parallel limb design: The DXT features a parallel limb design, which helps to reduce noise and vibration during the shot.
  • Harmonic dampers: The bow is equipped with harmonic dampers, which are designed to further minimize noise and vibration.
  • String suppressors: The DXT comes with string suppressors that help to reduce string oscillation and noise upon release.
  • Roller guard: The Mathews DXT is equipped with a roller guard, which helps to reduce friction and maintain smooth arrow flight.
  • SE4 limb material: The DXT utilizes SE4 limb material, which is reported to be lighter than previous models and contributes to the overall weight reduction of the bow.
  • Zebra bowstrings: The DXT comes with Zebra bowstrings, known for their durability and performance.

Mathews DXT Problems

The Mathews DXT compound bow is a reliable and well-regarded bow, but like any piece of equipment, it can have its share of issues. 

Here are some potential problems associated with the Mathews DXT compound bow and explanations of possible solutions:

String and Cable Wear:

Problem: Over time, the strings and cables on the bow may wear out or develop fraying, which can affect accuracy and safety.

Solution: Regularly inspect the strings and cables for wear or damage. Replace them as needed, following the manufacturer’s recommendations for maintenance intervals. Properly wax the strings to extend their lifespan

Tuning and Accuracy Issues:

Problem: Compound bows like the Mathews DXT require precise tuning for optimal accuracy, and if not properly tuned, they may exhibit accuracy issues.

Solution: Consult the owner’s manual or seek assistance from a professional archery shop for proper tuning. Adjustments to the arrow rest, nocking point, and draw length may be necessary for accuracy.

Noise and Vibration:

Problem: Compound bows can produce noise and vibration upon shooting, which can affect the overall shooting experience.

Solution: Add noise-dampening accessories such as limb dampeners, string silencers, and stabilizers to reduce vibration and noise. Properly maintain the bow and accessories to minimize noise from moving parts.

Draw Weight Adjustment:

Problem: Some users may find it challenging to adjust the draw weight on their Mathews DXT bow.

Solution: Consult the bow’s owner’s manual for instructions on adjusting the draw weight properly. If you’re unsure, seek assistance from a professional archery technician to ensure the adjustment is done correctly.

Peep Sight Rotation:

Problem: The peep sight on the bowstring may rotate, affecting accuracy and consistency.

Solution: Ensure that the peep sight is securely tied into the bowstring with appropriate serving material. Regularly check and adjust the peep sight’s position to maintain proper alignment.

Cam Timing and Synchronization:

Problem: Compound bows rely on precise cam timing and synchronization for optimal performance, and issues in this area can affect arrow flight.

Solution: Regularly check and maintain the cam timing and synchronization. Seek professional assistance if you notice any deviations or if the bow is not performing as expected.

Cable Slippage or Stretch:

Problem: Over time, cables may experience slippage or stretch, affecting the bow’s performance.

Solution: Regularly inspect cables for signs of slippage or stretching. If you detect issues, consult a professional archery technician for cable replacement or adjustment.

Accessories Compatibility:

Problem: Compatibility issues may arise when adding aftermarket accessories or upgrading components.

Solution: Consult the bow’s manual or the manufacturer’s website for guidance on compatible accessories. Seek advice from an archery shop if you plan to make significant changes to your bow’s setup.

It’s essential to perform regular maintenance, follow manufacturer guidelines, and seek professional assistance when needed to address and prevent problems with your Mathews DXT compound bow. Proper care and attention can help ensure your bow continues to perform at its best.

Mathews Dxt Draw Length Adjustment

The Mathews DXT compound bow, like many other Mathews bows, allows for draw length adjustment within a specific range. Here are the steps to adjust the draw length on a Mathews DXT:

Gather the Necessary Tools:

You’ll need a set of hex wrenches (Allen wrenches) for this adjustment.

Locate the Draw Length Modules:

On the Mathews DXT, the draw length modules are located on the cam(s). You will typically find one module on each cam. These modules are labeled with draw length settings.

Determine Your Desired Draw Length:

Decide on the draw length you want to set. Ensure it falls within the specified range for your DXT model.

Begin Adjustment:

Loosen the screws that secure the draw length modules on both cams. Use the appropriate hex wrench to do this. Be careful not to remove the screws entirely; just loosen them enough so that the modules can slide.

Slide the Modules:

Move both draw length modules simultaneously to the position corresponding to your desired draw length. The modules on both cams should be set to the same draw length setting for proper synchronization.

Tighten the Module Screws:

Once you’ve adjusted the draw length modules to your desired setting, securely tighten the module screws on both cams. Ensure they are tightened evenly and snugly.

Check Draw Length:

After tightening the module screws, double-check that the draw length setting matches your intended length. Measure it from the nocking point to the deepest part of the grip or use a bow square for precise measurement.

Test Draw Cycle:

Carefully draw the bow to ensure that it feels smooth and that the draw length adjustment has been executed correctly.

Tune the Bow:

After adjusting the draw length, you may need to fine-tune other aspects of the bow, such as the arrow rest and sight, to ensure proper accuracy and consistency.

Seek Professional Assistance (Optional):

If you’re uncertain about making draw length adjustments or want to ensure precise tuning, consider visiting an archery pro shop or working with a qualified technician. They can help you make adjustments and perform a comprehensive bow tuning.

Remember that adjusting the draw length can affect your bow’s performance and your shooting experience, so it’s important to make changes carefully and accurately. Always refer to the owner’s manual for specific instructions related to your Mathews DXT model and consider seeking professional assistance if you’re unsure about the process.

Mathews Dxt Draw Weight Adjustment

The Mathews DXT compound bow, like many other compound bows, allows for draw weight adjustment within a specified range. 

Here are the steps to adjust the draw weight on a Mathews DXT:

Please Note: Adjusting draw weight may require a bow press and the assistance of an experienced archery technician or professional. If you’re not comfortable with these steps, it’s highly recommended to have a qualified technician perform the adjustment.

Gather the Necessary Tools:

You may need a bow press, hex wrenches (Allen wrenches), and a bow scale for this adjustment.

Prepare the Bow:

Ensure that the bow is clear of any arrows, and make sure it is in a safe and stable position.

Locate the Limb Bolts:

The limb bolts are typically located at the end of each limb of the bow, near the riser. These bolts are used to adjust the draw weight.

Determine Your Desired Draw Weight:

Decide on the draw weight you want to set. Ensure it falls within the specified range for your DXT model. You can refer to the bow’s owner’s manual for this information.

Use a Bow Press:

To safely adjust the draw weight, a bow press is often necessary to relieve tension from the limbs. Consult the owner’s manual for your specific model or seek professional help to use a bow press correctly.

Loosen the Limb Bolts:

Carefully use the appropriate hex wrench to loosen the limb bolts on both limbs. Be cautious not to fully remove the bolts, just loosen them enough to allow for adjustment.

Adjust the Draw Weight:

Use a bow scale to measure the draw weight as you make adjustments. Turn both limb bolts clockwise to increase draw weight or counterclockwise to decrease it. Adjust both limbs equally to maintain balance.

Measure the Draw Weight:

After making adjustments, use the bow scale to measure the draw weight and ensure it matches your desired setting.

Tighten the Limb Bolts:

Once you’ve achieved the desired draw weight, securely tighten the limb bolts on both limbs. Ensure they are tightened evenly and snugly.

Test the Draw Weight:

Carefully draw the bow to ensure that it feels comfortable and that the draw weight adjustment has been executed correctly.

Seek Professional Assistance (Recommended):

While some archers may have experience with adjusting draw weight, it’s recommended, especially for beginners, to seek the assistance of a professional archery technician or visit an archery pro shop to ensure precise and safe adjustments.

Remember that altering the draw weight can significantly impact your bow’s performance and your ability to shoot comfortably and accurately. Always refer to the owner’s manual for your specific Mathews DXT model and prioritize safety when making adjustments.

Mathews DXT Problems

Frequently Asked Questions

What is the Mathews DXT compound bow?

The Mathews DXT is a compact and highly regarded compound bow known for its performance, accuracy, and versatility. It was part of the Mathews flagship series.

What is the draw weight range of the Mathews DXT?

The Mathews DXT typically had an adjustable draw weight range of 50-70 pounds, making it suitable for a wide range of archers.

What is the axle-to-axle length of the Mathews DXT?

The axle-to-axle length of the Mathews DXT is approximately 29 inches, which contributes to its compact and maneuverable design.

What is the brace height of the Mathews DXT?

The Mathews DXT typically had a brace height of around 7 inches, which can affect its speed and forgiveness.

Is the Mathews DXT suitable for hunting?

Yes, the Mathews DXT is well-suited for hunting due to its compact size, versatility, and performance. Many hunters have used it for various game types.

How can I adjust the draw length on the Mathews DXT?

The draw length on the Mathews DXT can be adjusted by changing the modules or cams on the bow. Consult the owner’s manual or a professional archery technician for guidance on adjusting the draw length properly.

Can I upgrade or customize the Mathews DXT with accessories?

Yes, the Mathews DXT can be customized with various accessories such as sights, stabilizers, quivers, and more. Ensure that the accessories you choose are compatible with the bow’s specifications.

What maintenance is required for the Mathews DXT?

Regular maintenance includes waxing the strings and cables, checking for wear, ensuring proper alignment of accessories, and inspecting cams and cables for damage. Refer to the owner’s manual for specific maintenance guidelines.

Is the Mathews DXT suitable for beginners?

The Mathews DXT can be used by archers of different skill levels, including beginners. However, it may require adjustments and guidance from experienced archers or technicians to ensure proper setup and shooting technique.